Basic swimming pool equipment recommendations:

First, the design: diaphragm pool cleaner equipment design must consider the exact purpose (public, private, contests, hotels, etc.) and user types.
For example: the pool shape (the general standard and free-form pool), pool size and depth of the spillway (type and installation area), Workshop (water treatment and recycling, etc.), accessories (channel ladder, fixed parts, underwater lights springboard, jump station, insulation sealing, etc.), around the pool (pedestrian zone, red cistern), service area (dressing room, bathroom, toilet, etc.).
Second, the concrete pool: Many pool built on the ground, following the rules is to ensure the successful installation of elements of swimming pool equipment and obtain the best results.
After the injection, pay special attention to check off the channel (key parts pressure more concentrated, easy to cause cracks when closed) and swimming walls and bottom mounting accessories (lights, ladders and lanes separated holder).
Third, prior to construction, it is recommended to follow the instructions to know professional installation company to check whether the walls and floor tiled requirements have been met, in order to eliminate cracking problems caused by depression base of the wall.
For non-tiled section must comply with design specifications. Walls must not deviate with full vertical verticality bottom, especially swimming thin adhesive plaster were used instead of the bottom of the economic construction of the wall base is not standardized, the adjustments made very limited.

To be selected shore-based pool cleaner models according to the pool area.

Combined shore-based swimming pool auto vacuum cleaners and hove into pusher type.
General pusher (such as our products are pusher type 2060,2061,2062,2063) offshore sewage suction distance of five meters or 8 meters, as the staff were on the opposite sides of smoke pollution, when you can smoke pollution distance of 10 meters or 16 meters. So I chose this putter type sewage suction machine, the width of the pool should not be more than 15 meters, or should be used hove style.
Hove formula with a rope length of 30 m, matching sewage suction tube length of 30 meters, so this type of hove largest sewage suction machine suction sewage distance of 30 meters, so the biggest Standard swimming pool (50 m long, 25 m wide) can be appropriate for use.

pool cleaner Caution

1, when the Robotic automatic pool cleaners is placed on the land, do not turn on the power, otherwise it will cause serious damage to the sewage suction machine.
2, pool cleaner power cord must be plugged leakage protection devices and protected with the socket, and make sure the ground wire grounding specifications, reliable socket.
3, when the pool cleaner working forbids any person to enter the water to avoid danger.
4, flapper auto pool cleaner before each turn, we should try to exhaust gas inside the machine (not fizzy or machine completely sink the bottom), so as not to work because there are gas impact of sewage suction machine.
5, sewage suction machine cable float sub-location can not be moved, so as not to affect the buoyancy, thereby affecting sewage suction machine working posture.
6, before the pool automatic cleaners power, must confirm the cable should be completely in a relaxed state, in order to avoid the winding work, the influence of the suction cleaning dirt machine. Severe cases may lead to sewage suction machine damage.