How to Troubleshoot Pool Cleaner

The Baracuda G3 is one of the most reliable Suction Side Pool Cleaners we sell. Being a cleaner that works itself to the bone, the G3 is going to need some help from you in order to stay in good condition.
Common Baracuda G3 Problems
Check out these troubleshooting techniques to see if it will help your Baracuda G3 start cleaning again:
Problem Solution
Cleaner does not move or moves slowly.
Confirm that the main drain is closed.
Use Flow Gauge to ensure proper flow.pool rechargeable vacuum cleaner Note: In water 60° F (16° C) or less, it may be necessary to increase flow to compensate for the reduced flexibility of the hose and diaphragm.
Backwash filter and empty pump basket.
Check diaphragm for damage or wear.
Check for air in system. If water level in pump basket drops or you see excessive air bubbles in the pump basket or coming from the return lines, there is air in the system. Check hose connections,Above ground pool cleaner tighten all fittings at pump and check o-ring at pump basket for wear.
Cleaner patterns, does not cover entire pool.
Use Flow Gauge to verify proper flow. Increase flow to improve climbing. Reduce to move cleaner off the walls.

Basic swimming pool equipment recommendations:

First, the design: diaphragm pool cleaner equipment design must consider the exact purpose (public, private, contests, hotels, etc.) and user types.
For example: the pool shape (the general standard and free-form pool), pool size and depth of the spillway (type and installation area), Workshop (water treatment and recycling, etc.), accessories (channel ladder, fixed parts, underwater lights springboard, jump station, insulation sealing, etc.), around the pool (pedestrian zone, red cistern), service area (dressing room, bathroom, toilet, etc.).
Second, the concrete pool: Many pool built on the ground, following the rules is to ensure the successful installation of elements of swimming pool equipment and obtain the best results.
After the injection, pay special attention to check off the channel (key parts pressure more concentrated, easy to cause cracks when closed) and swimming walls and bottom mounting accessories (lights, ladders and lanes separated holder).
Third, prior to construction, it is recommended to follow the instructions to know professional installation company to check whether the walls and floor tiled requirements have been met, in order to eliminate cracking problems caused by depression base of the wall.
For non-tiled section must comply with design specifications. Walls must not deviate with full vertical verticality bottom, especially swimming thin adhesive plaster were used instead of the bottom of the economic construction of the wall base is not standardized, the adjustments made very limited.

To be selected shore-based pool cleaner models according to the pool area.

Combined shore-based swimming pool auto vacuum cleaners and hove into pusher type.
General pusher (such as our products are pusher type 2060,2061,2062,2063) offshore sewage suction distance of five meters or 8 meters, as the staff were on the opposite sides of smoke pollution, when you can smoke pollution distance of 10 meters or 16 meters. So I chose this putter type sewage suction machine, the width of the pool should not be more than 15 meters, or should be used hove style.
Hove formula with a rope length of 30 m, matching sewage suction tube length of 30 meters, so this type of hove largest sewage suction machine suction sewage distance of 30 meters, so the biggest Standard swimming pool (50 m long, 25 m wide) can be appropriate for use.

pool cleaner Caution

1, when the Robotic automatic pool cleaners is placed on the land, do not turn on the power, otherwise it will cause serious damage to the sewage suction machine.
2, pool cleaner power cord must be plugged leakage protection devices and protected with the socket, and make sure the ground wire grounding specifications, reliable socket.
3, when the pool cleaner working forbids any person to enter the water to avoid danger.
4, flapper auto pool cleaner before each turn, we should try to exhaust gas inside the machine (not fizzy or machine completely sink the bottom), so as not to work because there are gas impact of sewage suction machine.
5, sewage suction machine cable float sub-location can not be moved, so as not to affect the buoyancy, thereby affecting sewage suction machine working posture.
6, before the pool automatic cleaners power, must confirm the cable should be completely in a relaxed state, in order to avoid the winding work, the influence of the suction cleaning dirt machine. Severe cases may lead to sewage suction machine damage.

Swimming pool cleaner suction pipe is connected to the pump and pipe smoke pollution head, called the swimming pool suction sewage pipe, or pool cleaner suction sewage pipe. There are different materials and sizes to fit different styles of pool cleaner.
swimming pool solar cover rollers plastic sewage suction sewage suction pipe and steel pipe. First, in terms of the plastic suction sewage pipe. Plastic suction sewage pipes have the old and the new. The old section of diameter of 1.5 inches and a length of 15 meters, the pool will be two large connected use, consisting of 30 meters of sewage suction pipe. Double tube, hardness enough, pressure durable and will not be sucked flat; can be easily moved from floating on the water, and does not stir the bottom of the dirt and smoke pollution affecting results.
?The new is a double self-floating suction sewage pipe diameter is 2 inches, a 10 m, 30 m in a group. Thick smoke pollution is aggravated tube, a sufficient thickness, wear durability; higher than the hardness of the old, more robust, and will not appear sucked flat tube phenomenon, let suction sewage cleaning work carried out smoothly. You can float on the water pipes themselves, easy to move, do not stir the bottom dirt and smoke pollution impact.

Outdoor pool cleaner to clean the pool cleaner is also called. There are two kinds of hand cleaners and automatic cleaners.
Outdoor swimming pool water than the indoor pool for a trouble, a big impact to the external environment, such as sun exposure, rain, external leaves, spores, dust falls, there will be all kinds of weather, water quality and other treatment increased difficulty. Especially the outdoor dust more, which cleaners can use?
Depends on what vacuum cleaner can be used, depending on the context or the pool, we must first understand the pool size, length and width.

There is a swimming pool water treatment process called the launch purifying agent, water purification agent, there are two general clarifying agent and precipitant (PAC), which is the purifying agent PAC numerous pools in use, it called pool precipitant. After running the PAC, it will pool in the dirt and dust suspended in the water to precipitate coagulation sedimentation to the bottom, the same shape as the mud attached to the bottom. In this case, if you use automatic pool cleaner with suction dirt, the water can not remain stationary, will precipitate good dirt again drift back into the water, it will very much affect the sewage suction effect. It is necessary to put the PAC can not use the automatic swimming pool cleaner, but to use the manual pool cleaner.
If we do not need to put in the precipitated water purifying agent Kerui De fining agents or clarifying agents clear, it will be fine by adsorption cation impurities in water to form larger particles, so that with the water into the circulatory system, that is to say , put in clean water after fining agents need to open circulatory system for 6-12 hours, so as to ensure clean water. Therefore, there is no running PAC pool, use of automatic pool cleaners, you also need to have a better filtration system.